aluminum extrusion press

use hot log shear furnace to heating long billet and cut billet according setting length, after cutting ,convey the billet into extrusion press automatically. 1. Hot log furnace introduction: hot log shearfurnace is on our best selling line and is our domestic initiative of aluminum aluminum machine for cutting aluminum profiles 2.Processing method: casting aluminumhot log furnace--pressing profiles--hot log furnace--pressing profiles 3.Main features of hot log shears: hot log shears is durableless fault; knife edge of aluminum is straight and smooth; oil is non-leaking Pre-pressing heating equipment, which is equipped with pressing machine 4. Parameters: Length of aluminum: from 2500mm to 8000mm Diameter of aluminum:from Φ70mm to Φ300mm Length of cutting:from 250mm to 1000mm Using temperature: from450centi degree to 520 centi degree Temperature difference: ±5centi degree Fuel: liquefied petroleum gaslight oilnatural gascoal and so on (can be burned from up and down at 90centi degree) Burnup: from22 to 27kg/t.Al( light oil) from 26 to 30m3/t.Al( natural gas) Producing period: from 90 to 200second/time 5.Matching: It has horizontal style and vertical style according to request of customers Adopting imported PLC touch screen, realizing man-machine interface and remote maintenance and technology upgrading 6.Main features: wide range of adaptation, convenient to organize and produce, improving yield by 5%8%,consumption is reduced by 1%( compared with general furnace)